Part Number: 4202BN Wired Surface Mounted Push Button , Brushed Nickel, 76mm x 32mm

2 Wire Bell Push. Size 76mm x 32mm 16 volt, 2 amp maximum Surface Mount Fitting. Both Lighted or Non-lighted. (Remove the bulb for Non-Lighted operation).

Notes Distance between screw holes - 52mm The movement and contacts are contained in front of the plate, and pushes against the surface behind. If there are any large holes or indentations behind, then packing may be required behind the movement The bell push will light when the bell unit is powered by an 8v a/c transformer, but the bell push bulb should be removed when the doorbell is powered by batteries, otherwise the bulb will drain the batteries. The push button is a pearled plastic, to allow light to pass through.