Part Number: 2205BZ Wired Flush Fitting Push Button , Bronze

2 Wire Bell Push. Size 76mm x 33mm 16 volt, 2 amp maximum Flush Fitting. Both Lighted or Non-lighted.

Notes Distance between screw homes - 55mm The movement and contacts are contained behind the front plate and are 16mm in diameter. Therefore a minimum 19mm diameter hole is recommended The depth of the barrel movement behind the front plate is 14mm The bell push will light when the bell unit is powered by an 8v a/c transformer, but the bell push bulb should be removed when the doorbell is powered by batteries, otherwise the bulb will drain the batteries. Colour : In overcast conditions this bronze push appears almost black, but in sunlight the bronze shade develops a lighter hue.